|
|
|
Who's Online
There currently are 5956 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
EN27
PIN-UP Pin-Up mode*
To Delete Unwanted Still Images . . . .... when unwanted still images are stored in the memory card or its memory is full, refer to �Deleting Files� ( pg. 32) and delete unwanted still images. To Remove The Shutter Sound . . . .... when you do not want to hear the shutter sound, set �BEEP� to �OFF� in the Menu Screen ( pg. 38, 40). The sound is no longer heard from the speaker.
FRAME Snapshot mode with frame*
FULL Snapshot mode with no frame*
NOTES: � Even if �MULTI-4� or �MULTI-9� is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night-Scope ( pg. 45). � The image is stored in the VGA mode regardless of the image size mode setting ( pg. 15) if �MULTI-4� or �MULTI-9� is engaged. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 39), the Stabiliser will be disabled. � If Snapshot recording is not possible, � � blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 46) is
�
MULTI-4 Multi-Analyzer 4
� �
MULTI-9 Multi-Analyzer 9
�
�
engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. If shooting is not performed for approx. 5 minutes when the Power Switch is set to � � or � � and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor. The Motor Drive mode ( pg. 50) is disabled when the VIDEO/DSC Switch is set to � �. When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape. Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF. In the XGA mode, images are shot in 720 x 576 pixels and they are converted and stored in the XGA mode file size (1024 x 768 pixels).
* There is the sound effect of a shutter closing.
|
|
|
> |
|
