|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This service manual helped me to repair my PIONEER. Iam very satisfied, that I found it here.
Even the price of manual was not so high that person would not be able to spend a few money.
But that is very worth spent money. Thanks
;
Excellent quality service manual. Quick processing, fair prices. Love to do business again. Thank you!!!
;
Excellent service manual, the only known point of note is the alignment of improvability scanned pages within the pdf page. The resolution is good.
;
I was very glad recieving the service manal from You. Additionaly very fast. Extremaly nice servicing. Thanks very mach! Now my GX-220 working better, than it was made. Alexander from Moscow, Russia/
;
Sweet! I won the item on eBay and couldn't adjust the geometry or even keep a steady picure. This guide has the full schematics (not available anywhere else as far as I could tell), and was a bargain for the wealth of knowledge it contains. I hooked it up to my testing equipment, tweaked a few potentiometers and got it playing videogames in no time. Thanks!
XV-FA900BK/XV-FA902SL
SECTION 2 Disassembly method
2.1 Main body 2.1.1 Removing the top cover (See Fig.1) (1) Remove the four screws A on each side of the body. (2) Remove the two screws B on the back of the body. (3) Lift the rear part of the top cover and remove in the direction of the arrow while pulling both sides of the top cover outward.
Fig.1 2.1.2 Removing the front panel assembly (See Fig.2 and 3) � Prior to performing the following procedure, remove the top cover. (1) Disconnect the card wire from connector CN801 and CN803 on the servo control board, and CN951 on the power board respectively. (2) Remove the three screws C on the upper side of the body. (3) Remove the three screws D on the bottom of the body. Remove the front panel assembly toward the front.
Fig.2
Fig.3
7
|
|
|
> |
|